Swift Driving Academy CDLP Training Manual Practice Test

These questions are part of the practice quiz. Start practicing

• Regarding overhead clearance, which statement is true?
• Why is proper load distribution important for vehicles with multiple axles?
• During a coupling inspection, what key points should you check on the trailer and kingpin?
• What is the purpose of pre-trip “in-cab” checks related to gauges?
• Which of these can cause a vehicle to skid?
• You are checking brakes and suspension. Which statement is true?
• What does a red triangle with an orange center on a vehicle ahead indicate?
• You are driving a tractor-trailer on a downhill off-ramp with a curve. What should you do before entering the curve?
• When turning left from Pine Street onto Cedar Street as a tractor-trailer on a two-lane road, where should you begin the turn?
• Which option best completes the principle for safe cargo loading?
• Which risk is most directly mitigated by proper load distribution on a multi-axle vehicle?
• In daytime conditions with reduced visibility due to rain or snow, you should:
• What might rust around wheel nuts indicate?
• What is the basic purpose of the Hours of Service rules for CMV drivers?
• If you must leave the road in a traffic emergency and you are on the shoulder, what is the recommended method for re-entering the pavement?
• Why is proper steering control important in tight turns?
• During a pre-trip, how should trailer doors be evaluated for security?
• Which item is included in the engine compartment inspection?
• Which practice best helps prevent fatigue on long trips?
• Which statement about staying alert to drive is true?
• High beams should be used which of the following?
• If you must stop to take a nap, where should you go?
• How should you handle congestion and heavy traffic during a long haul?
• What should you inspect regarding mirrors?
• If you must drive through a deep puddle or flowing water, which braking action helps keep your brakes working?
• Which conditions require you to use lower gears when descending a hill?
• Which gear should you use on a long, downhill grade on a manual transmission?
• If, during a pre-trip, you discover a damaged trailer door, what should you do?
• How should you handle a van or box trailer with doors that don’t latch properly during a pre-trip?
• Which Of These Would Tell You That A Shipment Contains Hazardous Materials?
• Which items are checked in a pretrip inspection?
• In night driving, which practice helps ensure you can stop within your sight distance?
• How do wet, icy, or snowy conditions affect braking distance for large vehicles?
• Which driving practice is most important when braking a heavily loaded CMV on wet or icy roads?
• What is a key rule when approaching a school zone with a CMV?
• Which statement about vehicle fires is true?
• According to the Drivers Manual, why should you limit the use of your horn?
• A key principle to remember about loading cargo is to keep the load:
• Which statement is true about shifting?
• If you are being tailgated, what is the recommended action?
• In a traffic emergency, you should manage speed by which of the following?
• How do you correct a rear-wheel acceleration skid?
• What indicates the tractor protection valve has engaged to stop trailer air flow during a leak?
• How should you handle slippery surfaces during braking?
• Which statement about tires on a vehicle is true during a pre-trip?
• Without Haz-Mat Endorsement, you may haul hazardous materials when:
• When turning left with a long vehicle onto a multi-lane street, which left-turn lane should you use?
• Which statement about cargo loading is true?
• How does electronic logging device (ELD) usage relate to hours-of-service compliance?
• What is the recommended way to communicate with a helper when backing a heavy vehicle?
• How should you handle a loss of steering control?
• Why is proper space management important for large vehicles?
• If you lack HazMat Endorsement and are asked to deliver a placarded hazmat load, what should you do?
• If cargo is loaded by the shipper, the driver is not responsible for overloading.
• To avoid a crash when steering, which practice is recommended?
• What is the recommended response to sudden weather changes on the road?
• When inspecting tires, what are the key items to check?
• What is the purpose of the air brake system in most CDL vehicles?
• Which statement best describes why tire temperature matters on a long trip?
• Which statement is not a correct practice regarding tires on the vehicle?
• What will keep an engine cool in hot weather?
• What is the significance of inspecting lug nuts during the pre-trip?
• You are turning left from a street with two left-turn lanes into a multi-lane street. Which left-turn lane should you use?
• When must you use your turn signals in CMV operations?
• On a slippery road, stopping distance will:
• Cargo that is not loaded or secured properly can cause:
• Brake fade: which statement is true?
• What is the primary purpose of performing a thorough pre-trip inspection of a commercial vehicle?
• Regarding truck escape ramps, which statement is true?
• What is the recommended initial action if a tire blows while you are driving on a straight highway?
• When driving through work zones, you should:
• What items should you check in the engine compartment related to cooling systems?
• The center of gravity can affect stability in what way?
• In work zones, which of the following is recommended?
• Which statement best summarizes safe cargo securing practice for heavy items?
• Which of the following is a major section of a pre-trip inspection?
• Which statement about drinking alcohol is true?
• When driving at night, which statement is correct about using headlights and stopping distance?
• During a traffic emergency, which rule is the best to remember to reduce risk?
• How should you handle hazardous materials during a pre-trip inspection?
• When signaling for a lane change on the highway with a CMV, you should:
• What is the proper procedure for braking in a downhill descent with a heavy load?
• On a slippery road, which of the following is a good practice?
• At an accident scene, move severely injured persons only if there is danger due to fire or passing traffic. This statement is used how?
• When operating a CMV at night, what is recommended regarding headlights and caution?
• Which cargo securing methods are commonly used for heavy items?
• If you had to drive onto the right shoulder to avoid a crash and you are now at about 45 mph on the shoulder, how should you move back onto the pavement?
• How should you plan a trip to minimize fatigue and improve safety?
• In slippery conditions, which action helps maintain control when turning?
• If you notice a load shift under your trailer during travel, what is the recommended step?
• At highway speed, the recommended look-ahead distance is about how many miles?
• If you find a leak in the exhaust system during a pre-trip, what should you do?
• What is the proper way to hold a steering wheel?
• How should you react to a vehicle under your trailer that appears to be shifting?
• What is a common hazard associated with unsecured loads?
• Which statement about speed on a wet road is true?
• What is the recommended practice for using the horn in urban driving with a CMV?
• Escape ramps are designed to accomplish which of the following?
• What is the main purpose of keeping a logbook or ELD for CDL operations?
• Which statement about marking a stopped vehicle is true?
• When restarting a heavy vehicle with a manual transmission on an uphill grade after stopping on the shoulder, what is the best practice to get moving again?
• Hydroplaning is most likely under which condition?
• If you do not have a HazMat Endorsement and are asked to deliver a placarded hazardous materials load, what should you do?
• Which statement is true about braking system components?
• What is counter steering?
• During cross-country trip planning, which factor should be considered to identify potential safety risks?
• When securing heavy items, what combination ensures effective restraint?
• Which statement about speed management on slippery surfaces is true?
• Which statement about cold-weather driving is true?
• Which combination of actions is recommended to maintain fuel efficiency on long trips?
• High beams should be:
• Which consequence is associated with cargo that is not loaded or secured properly?
• Which statement best describes how to stay alert during a long drive?
• What should you verify about hazardous materials cargo before transport?
• Which statement best reflects cargo securing practices?
• If you experience brake fade while driving, what should you do?
• Which items must be checked under the engine compartment during a pre-trip inspection?
• In a snowstorm, how should windshield wipers be adjusted?
• Which brake heat statement is true?
• Which factors influence the safe operation of a CMV at night?
• In first aid at an accident scene, which step helps control bleeding?
• When approaching railroad tracks with a heavy vehicle, what factor is essential to determine safety?
• What is the purpose of proper speed management in urban CMV operation?
• If you notice a wheel has become loose while driving, what is the proper action?
• At 55 mph on dry pavement, the total stopping distance is best described as about the length of which?
• How do you verify proper operation of the horn and other warning devices?
• Which statement correctly identifies a factor that changes a vehicle's clearance height?
• How far should a driver look ahead of the vehicle while driving?
• When passing a vehicle at night, which action is recommended?
• Backing practice: which statement is true?
• In the event of steering loss, what is the safest sequence of actions?
• Which of these is a good thing to remember about using mirrors?
• What is a common symptom of a leaking air line in an air brake system?
• Where should reflective triangles be placed when parking on the side of a level, straight, four-lane divided highway?
• When steering to avoid a crash, which practice should you follow?
• Which outcome indicates improper load distribution before departure?
• How would you identify a safe turning path for a vehicle with a trailer?
• Which cargo scenario requires extra caution on curves according to typical loading guidance?
• What is the primary purpose of proper load distribution on multi-axle vehicles?
• Why is it essential to perform a thorough roadside emergency routine?
• For heavy or long items, what is typically required to prevent movement?
• On which fires can you use the ABC fire extinguisher?
• Which combination of braking methods is recommended for a downhill descent with a heavy load?
• What is the risk of over-tightening cargo restraints?
• What is the purpose of the governor in an air brake system?
• To help stay alert while driving, you should:
• Which statement about backing a heavy vehicle is true?
• Which statement about driving in areas with strong winds is true?
• When you encounter a sharp curve with a fully loaded CMV, what is the recommended approach?
• Which of these best describes how you should use the brake pedal on a steep downhill grade?
• When setting out reflective triangles for safety, you should:
• Which action is most likely to cause a skid in poor road conditions?
• Which action helps prevent trailer swing when negotiating a curve with a heavy load?
• If you discover a major defect during a pre-trip inspection, what should you do?
• If glare ice makes the road very slippery, what action is best to take?
• When crossing or entering traffic with a heavy vehicle, which statement is true?
• Which of these is the proper use of vehicle lights?
• With hydraulic brakes, on a level road, if the brake pedal goes to the floor, which statement is true?
• Which statement about road conditions and stopping distance is true?
• Which option best describes a practical method to maintain fuel efficiency on long trips?
• If a hill or curve prevents drivers from seeing a stopped vehicle within 500 feet, what should you do with the rear reflector triangle?
• Which emergency equipment should always be carried in your vehicle?
• What do the governor cut-in and cut-out pressures control in an air-brake system?
• Name two signs of brake problems you might observe during a walk-around inspection.
• What is the purpose of the emergency equipment checklist?
• During a pre-trip, what is the purpose of warning devices on the braking system?
• Which are common signs of a faulty trailer coupling?
• Which statement about tires and hot-weather driving is true?
• If your vehicle pulls to one side when steering, what is the recommended action?
• When descending a hill with a heavy load, which practice helps maintain engine braking and vehicle control?
• During pre-trip checks, what should you verify with the gauges?
• To correct a drive-wheel braking skid, you should:
• The recommended look-ahead distance at highway speed helps you respond to hazards. Approximately how far is this distance?
• What should you verify about load distribution before departure?
• Which of these can cause a fire?
• Which of the following describes signs of tire failure?
• If a straight vehicle goes into a front-wheel skid, it will:
• Which statement about drugs is true?
• What is a good thing to do when driving at night?
• Which of the following would indicate brake problems during a walk-around?
• When backing a CMV with a trailer, what is a safe backing practice?
• Which of these is a sign of tire failure?
• What is a key reason for checking the battery and electrical connections before starting a CMV trip?
• As the Blood Alcohol Concentration (BAC) goes up, what happens?
• If an oncoming driver drifts into your lane, which action is most prudent?
• Which statement about brakes is true?
• Which checks constitute a basic safe-driving check before entering traffic?
• In poor weather, which statement about following distance is true?
• How should you approach inspection when loading and unloading at a dock or ramp?
• Escape ramps are designed to accomplish which of the following?
• When the roads are slippery, which action is recommended?
• During a pre-trip, which item ensures visibility and signaling?
• Under which major section would you inspect tires and wheels during a pre-trip inspection?
• What should you do if you experience a tire blowout while driving?
• How do you ensure your braking system is ready for a long trip?
• A 40-foot vehicle is travelling at 35 mph on a dry road with good visibility. What is the least amount of space you should keep in front of your vehicle to be safe?
• If your vehicle can safely travel at 55 mph but traffic is moving at 35 mph, what is the safest speed to maintain?
• What factors determine the number of tie-downs required for cargo?
• Which statement about weight limits is true?
• Which tire condition can contribute to a fire?
• Which of the following best helps minimize blind spots in a CMV?
• What is the purpose of a tug test after coupling a tractor to a trailer?
• Which of these is true about downshifting for a curve?
• Which statement about using turn signals is true?
• You are driving a new truck with a manual transmission. What gear will you probably have to use to take a long, steep downhill grade?
• Which of the following confirms a proper coupling after a tug test?
• Which of these statements about double clutching and shifting is true?
• What constitutes a basic framework for a pre-trip brake inspection on an air-brake tractor-trailer?
• What should you do if you observe a hazard while transporting hazardous materials?
• If which problems are found during a pre-trip, they should be fixed before the vehicle is driven?
• What are the main causes of wheel separations and how can you prevent them?
• Which action not effective for reducing blind spots?
• Which statement about speed management is true?
• The purpose of retarders is to:
• When turning with a vehicle that has a trailer, why is starting the wheel early important?
• Which of the following indicates misalignment or excessive space between the tractor and trailer during coupling?
• You do not have a Haz-Mat Endorsement on your Commercial Driver's License. You can drive a vehicle hauling hazardous materials when:
• You should stop driving:
• Enroute inspection should include checking for which items?
• How should you test the tractor protection valve during a pre-trip?
• During docking operations, what action helps minimize risk if you suspect a fault in the trailer's locking mechanism?
• If you miss a gear while upshifting, what should you do?
• Which statement about driving in areas with strong winds is true?
• Which of the following is a recommended practice when passing another vehicle?
• How do you determine if a tire is in proper inflation range?
• If cargo is not secured properly during transit, what risk is most likely to occur?
• In ideal conditions, what is a safe following distance for CMVs?
• Which of these is NOT a good rule to follow when caring for the injured at an accident scene?
• Which statement about certain types of cargo is true?
• In traffic, heavy vehicles require more space than cars.
• Which would tell you that a shipment contains hazardous materials?
• When driving, you should use your mirrors to check which of the following?
• What is the role of cargo securement devices in the load securement process?
• Which fires can you put out with water?
• Which of the following is not typically considered part of the emergency equipment checklist?
• What is the recommended action when approaching railroad tracks with a heavy vehicle?
• In wet or icy conditions, what driving practice helps maintain control?
• Which item belongs in a proper post-trip inspection?
• The center of gravity of a load: which statement is true?
• Name three critical items to check inside the cab before driving.
• The Drivers Manual suggests several things to do when you pass a vehicle. Which is NOT one of them?
• Which statement about wheels and rims is true?
• Retarders: which statement is true?
• Which statement indicates brakes are functioning properly during a test drive?
• Which statement about engine overheating is true?
• What is the significance of a “RODS” or logbook in CDL operations?
• Which action helps safe CMV operation at night?
• Which statement about accelerating is true?
• Why is seat belt usage critical for CMV operation?
• What is the significance of checking the battery and electrical connections?
• During a tire blowout on a straight highway with clear road ahead, what should you do first?
• What is a recommended method to reduce blind spots beyond adjusting mirrors?
• If you notice a crack in the mirror glass during inspection, what is the proper action?
• What is a typical rule of thumb for braking with a loaded CMV in adverse conditions?
• Which statement about backing a heavy vehicle is true?
• What may happen if a load shifts during operation?
• What is the most important thing to remember about emergency braking?
• Which item is not part of the pre-trip inspection of the engine compartment?
• Which statement is true about backing safety?
• You are driving on a two-lane road. An oncoming driver drifts into your lane and is headed straight for you. Which of these is most often the best action to take?
• How do you evaluate braking performance in a safe, controlled environment?
• If a brake warning light comes on while driving, what is the recommended action?
• You are starting your vehicle to move forward from a stop. If the wheels start to spin, what should you do?
• Brake fade: which statement is true?
• Controlled braking is primarily used to:
• What should you verify about lights and reflectors before starting a trip?
• During a traffic emergency, which action is NOT recommended?